Gear Pump Seizing
    A polystyrene (PS) sheet line was constructed using a two-stage, vented extruder and a gear pump. On several occasions the bearings on a gear pump would seize. Gear Pump Seizing is as follows.
    Specializing In The Production Of Extrusion Gear Pump
    Extrusion gear pumps is maily used in high temperature and high vidcosity polymer melt transportation,pressurization metering.
    Melt pump extrosion  becomes crucial, in-cluding preheating
    Melt pump extrosion becomes crucial, in-cluding preheating of the resin. Batte extrusion involves much lower shear than normal. Feedback control is used to maintain proper head by screw and/or feed control. The reduced output-stability requ
    When you buy extrusion pump,do you konw what is most importa
    Batte extrusion pump is mainly used in conjunction with extrusion pumpders or kneaders.And the introdutions of the Batte extrusion pump Technical Features
    extrusion pump of the best working condition(Next)
    4, the extrusion pump test, it should start low, check the rotation direction is correct; it must be stationary when starting the fan speed and then start to prevent high-speed reverse rotation, causing the switch trips and motor damage.
    extrusion pump of the best working condition(Part)
    extrusion pump is a complex structure of the equipment, the main air inlet valve, impeller, motor, the outlet composition. In different states, extrusion pump effect is not the same. Therefore, different operating conditions partly dissentin
Home PrePage 1 2 3 4 5 6 7 8 9 NextPage LastPage Total: 9Page52Record
©2015 Batte Machinery Zhengzhou Co,.Ltd. All rights reserved.
Batte Machinery Zhengzhou Co.,Ltd ,as extrusion pump manufacturers,virtue of its power to make high quality extrusion pump,extrusion gear pumps,extrusion melt pumps,etc.