batte melt pump

Discharge Gear Pumps

Discharge gear pumps offered with either a round inlet port, by means of which the suction flange of the melt pumps for extrusion is directly connected to the outlet flange of the reactor or as a low version, where the extrusion pump is connected between the pump and reactor flanges pump, in order to achieve an even larger and shorter inlet port.

Single Screw Extrusion Gear Pumps

single screw extrusion gear pumps use fluid mass to keep the extrusion pump primed. The main function of the gear pump as a component of the extrusion equipment is to keep the flow and pressure of the plastic melt flow.

Batte extrusion pump involves much lower shear than normal extruders pump

Batte extrusion pump involves much lower shear than normal extruders pump,Batte pumps extruder will have addi-tional shear elements Incorporated. The specialist for melt pumps assisted extrusion and compounding in the plastic industry.

Hot Melt Pumps For Extrusion Line

Hot melt pumps for extrusion line build consistent pressure and volume of output to keep both the melt viscosity constant and extruder output.

Volumetric Pumps Extrusion

Volumetric pumps extrusion are meter polymer through a set of intermeshing gears continuously improve product performance and quality, maintain the good situation in export.



©2019 Batte Mechanical Zhengzhou Co,.Ltd. All rights reserved. sales@battemachinery.com
Batte is a professional screen changer manufacturer, supplying screen changer, especially screen changer for extrusion mould